Epoxy is valued for its high gloss protective properties, but sometimes you might prefer something less shiny on your artwork. We have ways to make it less shiny.
Use our T-7512 resin, it has a lower gloss (60° angle test ≈ 30°) gloss uniform, smooth touch. Rapid curing, good surface drying, low odor, suitable for LED low energy curing. It has good adhesion to paper, film, wood, plastic, etc., the paint film is soft, improves scratch resistance, improves alcohol resistance, does not contain halogen, and can be well soluble in various resins.
|
Tg (℃) |
32 |
|
MW (GPC) |
350 |
|
Elongation at Break % |
40 |
|
Colour, Gardner |
2 |
|
Acid value, mg KOH/g |
max. 2 |
|
Viscosity at 25℃, mPa.s |
500 |
|
Specific Gravity |
1.08 |
|
Effective content |
100% |
T-7512 resin has a matte finish and does not contain matting powder or other fillers. It has high transparency as a film coating and can clearly maintain the natural texture of wood when used as a matte UV coating for wood. It has extremely low viscosity and can be applied as a solvent-free roller or spray.
T-7512 resin is recommended for UV paper printing ink, plastic matte film, matte UV inkjet printing. It has good pigment wettability, no thixotropy and no thickening.
T-7512 resin is recommended for use in matte nail polish sealant, which can improve the curing speed under low-energy LED light and the anti-scratch performance.
We hope this inspires you to try U-Sunny to create a matte finish for yourself - let me know your tips, comments and questions in the contact form!