Metal UV resin is suitable for steel rust prevention, metal sign decoration, color-coated steel plates, iron printing can making, can processing, etc. Most metals have poor corrosion resistance, and the metal surface has poor wear resistance and scratch resistance. Therefore, metal UV resin is needed for coating to protect the metal surface. There is generally an oxide film on the metal surface. The surface energy of the oxide film is low, which affects the adhesion of metal UV resin. Therefore, most metal UV resins will add adhesion promoters, such as acrylate with carboxyl groups, T -7128, T-7130 resin is recommended for use on the surfaces of organic and inorganic materials that are difficult to adhere to, such as glass, ceramics, and oxidized metals. Lower acid value, relatively higher surface hardness.
No pre-treatment is required in the fields of stainless steel, anodizing, water chromium plating, float, tempered glass, crystal glass, ITO conductive film, PCB circuit boards, vacuum plating of various metal topcoats, etc. It not only has excellent adhesion, but also has strong scratch resistance. It has good resistance to normal temperature water and boiling water, and has extremely low shrinkage rate. It has a very high double bond conversion rate and can still maintain excellent toughness and adhesion after vacuum evaporation or boiling. It can be directly applied to glass, ceramics, various metals and other surface decorative coatings, vacuum coatings, inks and adhesives without adding any additives.
T-7128 resin is recommended for use on surfaces of organic and inorganic materials that are difficult to adhere to, such as glass, ceramics, and oxidized metals. Lower acid value, relatively higher surface hardness. No pre-treatment is required in the fields of stainless steel, anodizing, water chromium plating, float, tempered glass, crystal glass, ITO conductive film, PCB circuit boards, vacuum plating of various metal topcoats, etc. It not only has excellent adhesion, but also has strong scratch resistance. It has good resistance to normal temperature water and boiling water, and has extremely low shrinkage rate. It has a very high double bond conversion rate and can still maintain excellent toughness and adhesion after vacuum evaporation or boiling. It can be directly used in surface decorative coatings, vacuum coatings, inks and adhesives on glass, ceramics, various metals, etc. without adding any additives.